DF2005S ~ df210s voltage 50 v ~ 1000 v 2.0 amp surface mount bridge rectifiers elektronische bauelemente 17-aug-2012 rev. a page 1 of 2 http://www.secosgmbh.com/ any changes of specification will not be informed i ndividually. rohs compliant product a suffix of -c specifies halogen & lead-free features low forward voltage drop, high current capability rating to 1000v prv ideal for printed circuit board reliable low cost construction utilizing molded pl astic technique results in inexpensive products the plastic material has ul flammability classific ation 94v-0 mechanical data polarity: as marked on body weight:0.02 ounces, 0.38 grams mounting position: any package information package mpq leader size dfs 1k 13 inch maximum ratings and electrical characteristics (rating at 25 ambient temperature unless otherwise specified. si ngle phase, half wave, 60hz, resistive or inductive load. for capacitive load, de-rate current by 20%.) parameter symbol ratings unit df 2005s df 201s df 202s df 204s df 206s df 208s df 210s peak repetitive peak reverse voltage v rrm 50 100 200 400 600 800 1000 v working peak reverse voltage v rms 35 70 140 280 420 560 700 v dc blocking voltage v dc 50 100 200 400 600 800 1000 v maximum average forward rectified current @t a =40c i (av) 2.0 a peak forward surge current 8.3 ms single half sine-wave super imposed on rated load (jedec method) i fsm 60 a maximum forward voltage @ 2 a dc v f 1.1 v maximum dc reverse current t j =25c i r 10 a t j =125c 500 i 2 t rating for fusing (t<8.3ms) i 2 t 10.4 a 2 s typical junction capacitance per element 1 c j 25 pf typical thermal resistance 2 r ja 40 c /w operating and storage temperature range t j , t stg -55 ~ 150 c note: 1. measured at 1.0 mhz and applied reverse voltage of 4.0 v dc 2. thermal resistance from junction to ambient mou nted on p.c.b. with 0.5*0.5"(13*13mm) copper pads. dfs ref. millimeter ref. millimeter min. max. min. max. a 8.0 8.2 e 0.9 1.2 b 2.2 2.6 f 7.8 8.5 c 6.2 6.2 g 5.0 5.2 d 10.0 10.3 h 0.2 0.4
DF2005S ~ df210s voltage 50 v ~ 1000 v 2.0 amp surface mount bridge rectifiers elektronische bauelemente 17-aug-2012 rev. a page 2 of 2 http://www.secosgmbh.com/ any changes of specification will not be informed i ndividually. ratings and characteristic curves
|